SCHOFIC UV-559 No-Clean Soldering Flux Paste, Halogen-Free 10ML Syringe
SCHOFIC UV-559 No-Clean Soldering Flux Paste, Halogen-Free 10ML Syringe - Electronics மீண்டும் ஆர்டர் செய்யப்பட்டுள்ளது மற்றும் மீண்டும் கையிருப்புக்கு வந்தவுடன் அனுப்பப்படும்.
பிக்அப் கிடைக்கும் தன்மையை ஏற்ற முடியவில்லை
பொருள் பற்றி
பாதுகாப்பான கட்டண பரிவர்த்தனை
பாதுகாப்பான கட்டண பரிவர்த்தனை
டெலிவரி மற்றும் ஷிப்பிங்
டெலிவரி மற்றும் ஷிப்பிங்
குறியீடு கிடைக்கிறது
699/-க்கு மேல் இலவச டெலிவரி B2Bக்கான INR GST ITC க்ளைம்

உதவி
நாங்கள் உங்களுக்கு எப்படி உதவலாம்?
உங்கள் ஆர்டர்
உங்கள் கணக்கு
திரும்பக் கோரிக்கை
மொத்த விசாரணை
GST தொடர்பான சிக்கல்
தயாரிப்பு தொடர்பானது
விளக்கம்
விளக்கம்
SCHOFIC UV-559 No-clean Soldering Flux Paste, Halogen-free 10ML Syringe
Product Specifications
【No Clean & Halogen-free】Halogen-free soldering flux paste can withstand high temperatures of 200-400 ℃, rosin residue after high temperature soldering does not yellow and transparent and clean, halogen-free flux viscosity and wettability are very good, the solder joints are full of lustre, you can effectively prevent the virtual soldering or welding is not uniform.
【Non-corrosive】Flux paste does not corrode the base material, in the welding temperature, no clean flux can increase the fluidity of the solder, remove the oxide film on the metal surface. And after testing, this solder flux after welding residue does not corrode the PCB board and components.
【No resistance】 # 8391 soldering flux low solid content, the choice of high-quality rosin, very little residue after welding, solder joints uniform and bright, and has a very high surface insulation resistance.
【Good thermal stability】 In the welding temperature, add flux to enhance the strength of the solder joints, the solder joint surface behavior of a layer of oxide film protection. Flux can prevent the soldering iron overheating to affect the welding components, has good stability and protection.
【Widely used】 Soldering flux widely used in all kinds of electronic products welding, lead and plating line process, electronic components welding and rework, all kinds of PCB components welding, etc.
Product Description
Flux can remove the oxidized film on the surface of the weld metal and increase the weld area. And can form a protective film on the welding surface to isolate the air and prevent the metal surface from re-oxidizing. It can reduce the surface tension of the solder and increase the diffusion of tin.
Apply flux evenly to the pins
flux for soldering helps to separate and evenly tin the pins, making them shiny and full.Excellent wettability, non-conductive, non-sticky residue.
Electronic Flux Paste
Non-corrosive to ICs and PCBs, easy to solder, quick to clean. Rosin has a low corrosivity, is neutral and does not corrode circuit components.
BGA solder and repair
The role of flux in BGA soldering: Removal of oxides "and" reduction of surface tension of the material to be soldered
Product Information
Technical Details |
|
Brand |
SCHOFIC |
Material |
Flux Pates |
Model number |
UV-559 |
Color |
Cream |
Size |
10CC |
Lead Free |
Yes |
Type |
UV No Clean Flux Paste |
Temperature Range |
100-400*C / 212-752*F |
Uses |
Soldering / Desoldering PCB/ BGA/ IC / SMD |
Type |
Surface Tester |
Control Type |
Push |
Features |
Lead Free Less Smoke / Excellent Wettablity No Resistance UV No Clean |
Warranty |
N/A |
Standard |
N/A |
Item Weight |
20gms |
Component Included |
Syringe Flux Paste 2 Nozzles 1 Pusher |
Technical DATASHEET |
|
|
விவரக்குறிப்புகள்
விவரக்குறிப்புகள்
-
Color
விமர்சனங்கள் (0)
விமர்சனங்கள் (0)
கட்டணம் & பாதுகாப்பு
பணம் செலுத்தும் முறைகள்
உங்கள் கட்டணத் தகவல் பாதுகாப்பாகச் செயலாக்கப்படுகிறது. நாங்கள் கிரெடிட் கார்டு விவரங்களைச் சேமிப்பதில்லை அல்லது உங்கள் கிரெடிட் கார்டு தகவலை அணுக முடியாது.